TH Street Elbows
| Forged Threaded Fittings – Street Elbows | |||||||||||||
|
Nominal
Pipe Size, NPS |
Center-to-Female End Street Ells, A [Note(1)] |
Center-to-Male End Street Ells, J |
Outside Diameter of Band, H [Note(2)] |
Min. Wall Thickness, G1 |
Min. Wall Thickness, G2 [Note(3)] |
Min. Length Internal Thread
[Note (4)] |
Min. Length Male Thread
|
||||||
| Class Designation | Class Designation | Class Designation | Class Designation | Class Designation | |||||||||
| 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | B | L2 | L | |
| 1 ⁄ 8 | 19.00 | 22.00 | 25.00 | 32.00 | 19.00 | 25.00 | 3.18 | 5.08 | 2.74 | 4.22 | 6.40 | 6.70 | 10.00 |
| 1 ⁄ 4 | 22.00 | 25.00 | 32.00 | 38.00 | 25.00 | 32.00 | 3.30 | 5.66 | 3.22 | 5.28 | 8.10 | 10.20 | 11.00 |
| 3 ⁄ 8 | 25.00 | 28.00 | 38.00 | 41.00 | 32.00 | 38.00 | 3.51 | 6.98 | 3.50 | 5.59 | 9.10 | 10.40 | 13.00 |
| 1 ⁄ 2 | 28.00 | 35.00 | 41.00 | 48.00 | 38.00 | 44.00 | 4.09 | 8.15 | 4.16 | 6.53 | 10.90 | 13.60 | 14.00 |
| 3 ⁄ 4 | 35.00 | 44.00 | 48.00 | 57.00 | 44.00 | 51.00 | 4.32 | 8.53 | 4.88 | 6.86 | 12.70 | 13.90 | 16.00 |
| 1 | 44.00 | 51.00 | 57.00 | 66.00 | 51.00 | 62.00 | 4.98 | 9.93 | 5.56 | 7.95 | 14.70 | 17.30 | 19.00 |
| 1-1⁄4 | 51.00 | 54.00 | 66.00 | 71.00 | 62.00 | 70.00 | 5.28 | 10.59 | 5.56 | 8.48 | 17.00 | 18.00 | 21.00 |
| 1-1⁄2 | 54.00 | 64.00 | 71.00 | 84.00 | 70.00 | 84.00 | 5.56 | 11.07 | 6.25 | 8.89 | 17.80 | 18.40 | 21.00 |
| 2 | 64.00 | 83.00 | 84.00 | 105.00 | 84.00 | 102.00 | 7.14 | 12.09 | 7.64 | 9.70 | 19.00 | 19.20 | 22.00 |
GENERAL NOTE: Dimensions are in millimeters.
(1) Dimension A of Table 5 for the appropriate fitting size may also be used at the option of the manufacturer.
(2) Dimension H of Table 5 for the appropriate fitting size may also be used at the option of the manufacturer,
(3) Wall thickness before threading.
“(4) Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests)
shall not be less than L2 (effective length of external thread) required by American National Standard for Pipe Threads (ASME B1.20.1). See para. 6.3. (As per ASME B16.11-2005)”
ADDRESS
Plot No. 496/4, G.I.D.C Makarpura,Vadodara,Gujarat 390010 India.
CONTACT NUMBER
+ 081286 81989
+ 099740 91681